To Wire or Not to Wire
<br>Wireless networks are en vogue, but your factory won't be successful unless you chose the right type of network and set it up properly. Wired networks want that each computer be linked via a wire to a central location, called a switch or hub. This often involves installing cables straight through walls and ceilings and can gift a challenge for anyone.
If the computers in your home or office are all within 500 feet of each other, a wireless network might be for you. A wireless network has no cables. It can join together computers on different floors of a construction or even over the street. Aside from the inevitable benefit of not having wires, wireless networks are more convenient since the setup, configuration, and reconfiguration can often be done within minutes, without broad planning.
<br>Wireless networks, however, are not as fast as wired networks. If you play computer games or want to view streaming video or other high-speed multimedia, a wireless network might not have sufficient capacity. But, if you just want to check e-mail and view web pages, a wireless network is a good choice. To install a wireless network, you need a Wireless entrance Point and a wireless network card for each computer. You will need to buy a wireless network card for each desktop computer, although most newer laptops come adequate with one.
Security is not a large concern in a wired network, since someone would have to physically join together to a wired network to break in. In wireless networks, a car parked surface with a laptop could positively join together to your network if you don't have permissible safety in place. To preclude this from happening, encrypt your wireless network connections, or set a password to entrance the network, or do both. Do It Yourself or Call a Professional?
If you determine to use a wired network, consider either you will setup it yourself or hire a professional. If you have a small number of computers that are all situated very close to one another, you may be able to buy pre-assembled network cables and join together them yourself. If you need to wire complicated floors and lay wire straight through ceilings and walls, you need a professional installation. If you go this route, it is best to begin with a floor plan of your office or home, determine what your current needs are, and consider how the network originate can be adapted to time to come needs. A professional installer should be familiar with Eia/Tia standards, local wiring and electrical codes, and development convention cables. Network cabling professionals are often judged by the neatness of their work, because sloppy cabling is more apt to deteriorate over time, harder to manage, and poses more of a fire risk.
Having a wireless network or a wired network is not mutually exclusive. Many small offices have a wired network in addition to one or more wireless networks, depending on their needs. Wireless networks are continuing to get faster, more secure, and less expensive. Wired networks will continue to coexist with wireless networks, often in the same homes and offices.
Setting up a Network -- Wired or Wireless?